Whether you’re preparing meals or stocking up on frozen foods, you rely on your freezer. When it’s not working as it should, you’ll need to address the issue as quickly as possible. Fortunately, most freezer problems can be resolved using some basic troubleshooting techniques. If you’re not sure where to start, here are some of the most common freezer problems to look out for and quick fixes you can try:
The Door Isn’t Closing
There are several reasons why your freezer door isn’t closing, but most of them are simple to fix. The most common reason is that your door seals are not sealing properly. A faulty seal will allow warm air to enter your freezer, which can cause melting ice to accumulate and lead to the door not closing properly. You can check to see if your door seals aren’t working by placing a piece of paper flat against them. If you can slip it through, the seals are faulty and need to be replaced.
The Compressor Isn’t Working
The compressor is responsible for bringing cold air into the freezer and cooling down food. If it isn’t working, this can make it difficult to keep food fresh. There are a few things that could be causing this problem. First, it is possible that the power cord is not supplying enough power to the compressor. If this is the case, unplug the unit from the wall outlet and check the power cord. If it is frayed or damaged, replace it with a new one. If the problem persists, you may have a bad start relay or compressor. To test the start relay, disconnect the power cord and shake the relay over and over until it makes a rattling noise.
The Light Isn’t Working
Many freezers don’t come equipped with a built-in light. This is often due to the fact that it’s a more densely packed appliance, which makes it harder for a light to illuminate all of the contents. The reason the light isn’t working is usually down to a broken bulb. If you replace the bulb, it should solve your problem. A red flashing light typically indicates that the freezer’s internal temperature has risen above the normal operating range. It will need to cool down and stabilize before the light will stop flashing. You can disable the high-temperature alarm or flashing red light by pressing the ‘Temp Setting’ button once. Then the light will turn off and the alarm sound will stop.
The Start Relay Isn’t Working
The starter relay is an important component in the ignition system that triggers the engine to start. It isn’t common for this component to fail, but it can cause problems when it does. If your starter relay isn’t working, there are a few things you can do to figure out why. First, make sure your battery is working. You can check for this by switching on other car accessories or devices that use the battery. If there’s no clicking or no current flow, you have a problem with the starter relay. The next step is to replace your starter relay.
Freezer still acting up? At Crews Appliance Repair, they pride themselves on being able to offer same-day quality repairs whenever possible and a 100-day warranty. Plus, if the cost of your repair exceeds $79, your service call is free! There’s no end to the types of household appliances they can fix. Contact them today: https://crewsappliancerepairservices.com/kitchen-appliance-repairs/
This post was written by admin